德國PTL擺錘沖擊測試機

 配件：

和標準IEC 60068-2-75/1997-08 Annex D Fif. D.4 相同

用來測試平整式樣品，原材料為山毛櫸木材，125mm×125mm×50mm ,鉆孔直徑65mm,置于規格為175mm×175mm×8mm的膠合板上。

型號： F 40.63

PTL Pendulum Impact-Test Apparatus
to test the mechanical strength with impact energies of 0,14 J up to 1,0 J
according to IEC 60068-2-75 :1997-08 § 4.2 Table 1 and Table 2, similar Annex D.
Striking element according to Table 1, ? 18.5 mm, equivalent mass 0.25 kg, impact energies and
heights of fall according to Table 2.

Standard Outfit:
tubular pendulum arm of steel, external diameter 9 mm, wall thickness 0.5 mm, pendulum length 1 000 ±1 mm effective, striking element, mass 200 g, spherical segment-shaped polyamide insert R 10 mm, 85 ≤ HRR ≤ 100 Rockwell hardness, base frame, height 1 270 mm, width 200 mm, with bores
for screws for mounting on a wall, extension arm, vertically adjustable, with horizontally
adjustable pendulum pivot,  extension arm, vertically adjustable, with release mechanism for the pendulum, scale for height of fall horizontally adjustable, Mounting Fixture according to IEC 60068-2-75:1997-08
Annex D Fig. D.3, with steel block 175 mm x 210 mm x 35 mm, mass 10 kg, turn able around its vertical axis and to be clamped with tommy screws, sheet of plywood 175 mm x 175 mm x 8 mm, in clamping rails moveable to the sides and to be turned in steps of 90°  around its central axis rectangular to the sheet of plywood. Design: Base frame papyrus-white structure varnished, steel parts black-oxide-finished or made of stainless steel,
 
Article No.: F  40.25
Accessory:
Mounting Block similar to IEC 60068-2-75:1997-08 Annex D Fig. D.4, for testing flush-type specimens, made of beech 125 mm x 125 mm x 50 mm, with through bore diameter 65 mm, on plywood sheet 175 mm x 175 mm x 8 mm,
 
Article No.: F  40.63

香港奧德賽創科技有限公司

深圳市奧德賽創精密儀器有限公司

FAX: +86(755)26978981

Mobile: +86—18028748540

E-mail: scl@hkauto.com.cn

www.weichubl.com